ECOSHADE

HOME > ECOSHADE > ENC-10H

ENC-10H

A sophisticated design accentuating
the horizontal lines of the slats

The slats use hollow aluminum extrusions that provide excellent rigidity. The smooth curves of the slats dramatically improve performance with respect to the wind. The horizontal lines of the slats are accentuated by the placement of the drive mechanism behind the slats.

MOTION


Slats in
horizontal position
Slats controlling light
Slats blocking light

Typical installation: Ecoshade ENC-10H

Design range

  • Ecoshade width: 1,000-1,800 mm
  • Ecoshade height: 1,000-4,000 mm
  • Open area of single window ≤ 7.0 m²
  • Note: Please inquire about other sizes.

Specifications

  • Material: Aluminum extrusions
    (slats and guide rails)
  • Color: Silver (anodized finish)
  • Motor: 100V AC (50/60 Hz, single phase), 2A max.

Installation conditions and precautions

  1. Maximum building height: 31m
  2. Maintenance scaffolding or a swing stage must be available.
  3. Must be linked to a wind sensor to protect against strong winds.
  4. Slats must be stowed in strong winds.
  5. Interior wiring and ducting work is not included.
  6. The power supply must be equipped with a dedicated earth leakage circuit breaker.

Note:

  1. A wind sensor is available as an optional item.
  2. Electrical operation only.
  3. Please inquire about alternative colors to the standard color mentioned above.
  4. Please inquire for further detail.
Inquiries & Document request Inquiries & Document request

Page Top